Drilling fluid

This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages) This article includes a list of general references, but it lacks sufficient corresponding inline citations. Please help to improve this article by introducing more precise citations. (June 2008) (Learn how and when to remove this message) This article is in list format but may read better as prose. You can help by converting this article, if appropriate. Editing help is available. (July 2022) (Learn how and when to remove this message)

In geotechnical engineering, drilling fluid, also known as drilling mud, is used to aid the drilling of boreholes into the earth. Used while drilling oil and natural gas wells and on exploration drilling rigs, drilling fluids are also used for much simpler boreholes, such as water wells.

The two main categories of drilling fluids are water-based muds (WBs), which can be dispersed and non-dispersed, and non-aqueous muds, usually called oil-based muds (OBs). Along with their formatives, these are used along with appropriate polymer and clay additives for drilling various oil and gas formations. Gaseous drilling fluids, typically utilizing air or natural gas, sometimes with the addition of foaming agents, can be used when downhole conditions permit.

The main functions of liquid drilling fluids are to exert hydrostatic pressure to prevent formation fluids from entering into the well bore, and carrying out drill cuttings as well as suspending the drill cuttings while drilling is paused such as when the drilling assembly is brought in and out of the hole. The drilling fluid also keeps the drill bit cool and clears out cuttings beneath it during drilling. The drilling fluid used for a particular job is selected to avoid formation damage and to limit corrosion.